ECOGRIP AAC BLOCK ADHESIVE
Company Achievements
With my them if up many. Lain week nay she them her she. Extremity so attending objection as engrossed gentleman something.
AAC Block adhesive
AAC Block adhesive typically consists of a blend of synthetic polymers, resins, and fillers. These components are carefully formulated to provide strong adhesion and excellent durability under dierent environmental conditions. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of upto 12mm thickness The surface of application must be properly cleaned for loose particles, dust, dirt, oil, and grease
Application
The mixing of adhesive must be done properly and thoroughly with water. The ratio of adhesive and water is approximately 25-30% of the weight of the adhesive. Apply a thin layer of mixed adhesive on the AAC blocks in the thickness of 3 to 5mm by using a proper trowel on which the block work is to be carried out. After placing the first block apply the AAC Block Adhesive of the same thickness on both the sides of the block continuously keeping a check on the line and level. The excess adhesive coming out of the block is cleaned immediately and the procedure is carried out for entire blockwork.