ecogripindia.com

EG 100 HEAVY DUTY EPOXY GROUT

Get in Touch

Company Achievements

With my them if up many. Lain week nay she them her she. Extremity so attending objection as engrossed gentleman something.

  • EG PU- 222

    is a Factory made multipurpose Polyurethane (PU) adhesive is a versatile and highperformance bonding solution widely used in various surfaces due to its exceptional bonding strength, flexibility, and chemical resistance. As a key player in modern adhesive technologies, PU adhesive has revolutionized the way materials are joined, enabling innovation and eciency across numerous applications.

  • Preparation

    The floor which is to be tiled should be pre- cleaned to remove all traces of any coating, oil, dust, grease or other such contaminants.

  • Areas of Application

    EG-222 PU a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.

  • B)Method of Application

    Apply PU-222 adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large format tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive.

Features & Benefits

  • This is a two-component product that is easy to use. You can just mix and use it on-site.
  • It has water, temperature, and shock-resistant properties that make it suitable for use in diverse external conditions.
  • It can be used on large format tile applications as it has a long open time.
  • It is fit for use on high vibrational areas as it is a highly flexible adhesive.
  • Being chemical resistant, this adhesive is an excellent choice for fixing various types of materials such as metal, plywood, and engineered stones in commercial and domestic applications
  • It is a low-VOC product which means it is not harmful to the environment.

Precautions:

  • Do not add water into the Epoxy
  • Do not apply on wet/damp tile joints.
  • Do not over-mix the material.
  • Ensure adequate ventilation during application in working place.
  • Do not apply Epoxy at temperature above 50°C
  • Do not allow the residue to remain on the surface more than 24hrs.
  • Keep out reach of children conditions.