ecogripindia.com

EG 40 PLUS PREMIUM WHITE

Get in Touch

Company Achievements

With my them if up many. Lain week nay she them her she. Extremity so attending objection as engrossed gentleman something.

  • EG 40+ PREMIUM WHITE

    is a Factory Made Multipurpose, high polymer modied powder oering vast utility including applications for oor & wall in interior & exterior areas for the Installations of all types of ceramic tile. vitreous. semi-vitreous tile, mosaic tiles and White stones over concrete and on a variety of substrates. It has good underwater shear bond that allows this product to be used for wet areas like swimming pools, water bodies and washrooms

  • Areas of Application

    This is suitable for tiles with apparent porosity 300mm x 300mm) tiles on a variety of surfaces, for both vertical and horizontal application, in dry as well as wet areas for indoor as well as outdoor application

  • Preparation

    The floor which is to be tiled should be pre- cleaned to remove all traces of any coating, oil, dust, grease or other such contaminants

Method of Application

  • The substrate to be tiled must be hard PCC substrate without undulations & levelling.
  • The surface to be tiled should be sound and thoroughly cleaned. Surface should be free from wax, grease, polish etc
  • Add 3 to 3.5 parts of powder to 1 part of water.
  • Mix with a trowel or slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
  • Leave mixture for 5 min. before using.
  • Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel.
  • The prepared paste is to be applied in vertical form on damped tile and in horizontal form on the surface or vice-versa. Using the notched trowel as these create a texture with more grip
  • Strictly apply the adhesive paste which can be tiled within 10 to 15 minutes
  • Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.
  • Fixing of large format tiles requires skilled or trained worker only

Features & Benefits

  • High bonding strength.
  • Water Resistant I non-porous
  • No extra curing is required
  • Applied even at low thickness of 3 mm, hence it provides more coverage area.
  • Bed Thickness can be used upto 8 mm
  • Highly recommended for outer cladding work
  • Premium grade multi-use adhesive.
  • Excellent tensile & shear adhesion.

Pot Life & Coverage

EG 40+ Premium white Adhesive mixed with water can be used
within one hour at an ambient temperature of 30°c and covers
approximately 30-40 sq.ft. on smooth and even surface
at 3mm thickness.
Note – Factors like Temperature, Humidity, Wind will aect the
Pot Life and Setting Time.