ecogripindia.com

EG 50 PLUS ELITE WHITE

Get in Touch

Company Achievements

With my them if up many. Lain week nay she them her she. Extremity so attending objection as engrossed gentleman something.

  • EG 50 ELITE GREY

    is a versatile, high-polymer modified powder for installing large format tiles on most substrates. It's suitable for interior and exterior floor and wall installations of ceramic tile, natural stone, granite, and Italian tiles over concrete and various substrates. With superior bond strength, flexibility, and resistance to shock and impact, it's ideal for demanding areas like external facades, industrial floors, and high-trac zones

  • Areas of Application

    EG 50 adhesive for exterior walls: Ideal for ceramic, clay, basalt, glass mosaic, porcelain tiles, and natural stones on plaster or concrete. Mixes easily with water, oers high adhesion, and workability

  • Preparation

    The floor which is to be tiled should be pre- cleaned to remove all traces of any coating, oil, dust, grease or other such contaminants.

Method of Application

  • The substrate to be tiled must be hard PCC substrate without undulations & levelling.
  • The surface to be tiled should be sound and thoroughly cleaned. Surface should be free from wax, grease, polish etc
  • Add 3 to 3.5 parts of powder to 1 part of water
  • Mix with a trowel or slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
  • Leave mixture for 5 min. before using
  • Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel.
  • The prepared paste is to be applied in vertical form on damped tile and in horizontal form on the surface or vice-versa. Using the notched trowel as these create a texture with more grip
  • Strictly apply the adhesive paste which can be tiled within 10 to 15 minutes
  • Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape o the adhesive and apply new coat.
  • Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.

Features & Benefits

  • High bonding strength.
  • Water Resistant I non-porous.
  • No extra curing is required. Applied even at low thickness of
  • Applied even at low thickness of 3 mm, hence it provides more coverage area.
  • Bed Thickness can be used upto 8 mm.
  • Highly recommended for outer cladding work
  • Premium grade multi-use adhesive.
  • Excellent tensile & shear adhesion.
  • Flexible and shock & impact resistant.

Pot Life & Coverage

EG 50 Adhesive mixed with water can be used within one hour at
an ambient temperature of 30°c and covers approximately 30-40 sq.ft.
on smooth and even surface at 3mm thickness.